Kyoritsu 5020 Instruction Manual Uživatelský manuál stáhnout pdf (Strana 2)

Introduction

Thank you for purchasing KEW LOGGER 5010/5020.

󱛠

Follow the procedure below and set time on the instrument before use.

1) Install the KEW LOG SOFT 2 and the USB Driver according to the

instructions written in the Install Manual for KEW LOG Soft 2.

2) Run KEW LOG SOFT 2 once install is completed. (Refer to

“

4. Start

“

KEW LOG SOFT 2

””

in the Install Manual.)

3) Confirm that the LOGGER and a PC is firmly connected with a USB

Cable and click

“

Time Synchronizing

”

4) Confirm that the Logger connected with the PC is listed on the

“

List of detected loggers

”

. (The USB Driver might not be installed

correctly when a message

“

No Logger is detected.

”

is displayed.

Refer to the backside of the

“

Cautions for installing USB Driver

install

”

“

6. Trouble shooting

”

(P.8) of the Install Manual and

re-install the USB Driver.)

5) Click

“

Time Synchronizing

”

Button while the LOGGER is powered on

and checks are marked in the box for each connected LOGGER to

set time.

󱛠

Read this manual and do your desirable settings. (Setting should be done

by using

“

KEW LOG Soft 2

”

. Settings for some Recording modes can be

done on the LOGGER.

󱛠

Read through

“

1. Safety Warnings

”

in this manual before using the

LOGGER in order to ensure safe operation of the instrument.

1 2 3 4 5 6 7 ... 55 56

Komentáře k této Příručce

Žádné komentáře

Kyoritsu 5020 Instruction Manual Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Kyoritsu 5020 Instruction Manual